The different types of installation of the swing gate

swing gate

The swing gate, also called the swing gate or the opening gate, is made up of two leaves and is a great alternative to the sliding gate. This type of gate can be combined with an operator for easy opening. For those who are planning to install one, here are some tips on how to install this type of gate.

What are the characteristics of the swing gate?

swing gate1The swing gate consists of two leaves and is generally offered with a manual lock as the opening system, allowing the pull in or out. It should be remembered, however, that so that the gate does not encroach on the public road, it is better to opt for an opening towards the interior. On the other hand, if the access is on an upward slope inwards then the opening may be damaged. Two solutions are then available: opt for a sliding gate or for an opening to the outside, but in the latter case, it will be necessary to ensure that the gate does not encroach on the public highway. Finally, if the street is sloping then a tailor-made gate will be more appropriate.

Regarding the materials available for the swing gate, there is a wide range of products in PVC, iron, steel, wood and aluminum, which promises a wide choice. As for the motorization of the swing gate, this is generally sold outside the automatic system, but it may however receive one. To avoid unpleasant surprises on arrival, it will therefore be necessary to ensure that the gate can accommodate a motorized opening system. Also know how to choose the type of motorization for swing gate depending on the configuration of your installation.

The different types of installation of the swing gate

A classic swing gate can provide a transom opening of up to 90 ° and a surface opening at an angle of up to 180 °. The latter is recommended for sloping terrain and portals that require turning before going up the driveway.

There are in particular two different laying methods for the swing gate.The installation of the portal between pillars and the installation of the rear portal with the upright pillar.For installation between pillars, you must first fix hinges on the pillars of the passage area before fixing the gate.Since the installation of pillars and hinges has to be taken into account, the passage area may be a bit narrow.This type of installation allows the gate to open at an angle of up to 120 °, which makes it suitable for all terrain configurations.The second installation technique involves fixing the pillars and gate hinges outside the passage area, perpendicularly, which provides a fairly spacious passage area.Note that this installation technique allows for an opening angle of up to 180 °.

Finally, regarding the installation of the sliding gate, the ideal is to entrust the task to a professional in the field who will be able to ensure that the gate is installed in compliance with aesthetic and safety standards.