No vehicle owner would like to have to deal with a hassle with their vehicle. However, the car can be prone to breakdowns related to its operation. It is not enough to know how to drive, it is also necessary to learn to identify the types of breakdown according to certain parameters.
All motorists will tell you that they've had a breakdown once. However, a broken down car can hide a problem linked to Engine. White exhaust smoke in case of failure of the cylinder head gasket and any other noise are indicators among many that serve to identify the failure of HER car. Nowadays, with new type cars, electronic breakdowns appear among the long list. Here is how to find the breakdown of your car.
Some faults that you can detect yourself!
There are some common breakdowns that a good car driver should know about, which he can deal with himself. For this, he must be attentive to the slightest noise coming from the engine. Although not an expert in auto mechanics, he can watch over the slightest apparent malfunction. One could cite among others the problems of bearings in the engine, the failures of spark plugs, the dry breakdowns or even the electronic failures.
Running out of gas or gasoline
Sometimes the needle that marks the fuel level gets stuck and you haven't noticed it. Thus, on the dashboard, everything is OK, while the tank is empty. In this case, the engine suddenly turns off in the middle of the freeway. Sometimes, before extinguishing, it gives the impression of absorbing gas when you press the accelerator pedal.
Try to restart the engine. If the latter picks up and turns off as soon as you step up the gear, it's probably a fuel failure. To check it, open your tank, and insert a long twig to see the fuel level.
Learn how to detect the bearing in the motor
Your car may be suffering from an engine bearing problem. In this case, failures of certain parts such as the water pump or the alternator may be the cause. A bearing in the motor produces a fairly loud noise.
Likewise, there is the wheel bearing. This problem is characterized by a deafening rumbling which increases withacceleration. Significant vibrations on the car can reveal rumbling transmission bearings.
The engine does not start: what failure does this show?
This is the kind of worry all car drivers dread. It happens suddenly and the origins are multiple. However, a battery discharge may well cause the engine to stop starting. But to be sure, some indicators can be observed. Weak headlight illumination or the off indicator on the battery dashboard can indicate this failure. Likewise, a non-functioning starter can lead to such a situation.
Starting and stopping the engine: what's behind it?
Several causes can be linked to this type of failure. The most important that comes to mind is the condition of the fuel. The latter may undergo decomposition due to long time spent in the tank. But if the fault persists, it may indicate, for example, a fault in the ignition system.
How to find electronic faults?
Cars today suffer from electronic failures. They act on a panel of sectors related to comfort, safety, transmission, engine, suspension and braking among others. This is why it is important to have a diagnostic kit on board. The latter gives the codes of any faults attributable to this type of fault. Based on these codes, the problem is easily identified.
Learn more about fault finding with insight on this article.